ENGLISH | 繁體中文 | 簡體中文

The Genuine Web Site for Wytron -- Professional Duplicating Controller Card

DVD-898 Professional SATA duplicating controller card

Model: DVD-898

BUS: SATA; Target: 5 ports

Latest generation of pure SATA bus CD/DVD/BD controller card (CD/DVD/BD copy card) built for SATA bus CD/DVD/Blu-Ray writer. Due to transition of industrial standard interface from IDE to SATA, all the CD/DVD/Blu-Ray disc writers available in the market are all converted into SATA bus. The releasing of DVD-898 is just for the purpose of using those writers for setting up the SATA CD/DVD/BD duplicator with medium capacity in order to complete the easy task of CD copy, DVD copy and BD copy.


Independent design DVD-898 provides six SATA ports on-board by using six fully independent SATA channels, one for master device and the other 5 ports to connect up to 5 sets of CD/DVD/BD SATA bus writer for max. burning capability. The master device can be either SATA hard drive or CD/DVD/BD Combo reader/writer. Through independent design, each port will then have its max. bandwidth to run at the max. burning speed for CD copy, DVD copy and BD copy.

High stability and durabilityInherited with Wytron's best tradition, DVD-898 is designed and produced to be a product with high reliability and durability. DVD-898 can work continuously in CD copy, DVD copy and BD copy all day long without failure. After day by day of usage, you may find that the writers connected with DVD-898 might be replaced for several runs but the DVD-898 is still there, work normally and quietly for you. Compared to the short life of those competitors' control cards, the high durability of DVD-898 is so impressive and it is absolutely worthy to be the controller card of your duplicator.

Upgradable firmware BIOS firrmware can be easily upgraded to suit the latest CD/DVD/BD writers released in the market. "One ring to rule all", Wytron's controller card is always fitted with one universal BIOS that suitable for all writers it supports and is not releasing special firmware for specific writer to cause inconvenience for customers, unlike the way of one firmware for one writer in the competitor's controller card.

EfficiencyDVD-898 equips with 64MB of DDRII-SDRAM. Through the good programming, the limited memory buffer is used effectively and efficiently, much better than those competitior's controller cards which equipped with much more memory size but without doing anything good, just wasting money and the cost.

Monitoring from PC Two RS-232 ports built-in, one is for monitoring and the other for automatical disc feeding device (or so-called autoloader). Operation status and information on controller card can be monitored via RS-232 connection between controller card and PC. Through the "Hyper-terminal" within WIndows XP, users can monitor all the operation from PC and yet save the message as logfile for trouble-shooting. Technique support all over the world can be done remotely and easily.

High compatibility with writers Max. connection compatibility for CD/DVD/BD writers in the market such as Pioneer, Asus, BenQ, LG, Lite-ON, NEC, Sony, etc. All are available for DVD-898 and there is no special firmware required to connect any specific writer. Blu-ray writers are also supported directly. No special firmware or additional cost is needed.

About Us | Home | Spec. download | Contact Us | ©2008 Wytron Technology Co., Ltd.







DVD controller memory card copy hard disk copy disc copy BD copy duplicator CF copy SD copy clone SAS duplicator SATA duplicator

dc ac power inverter yaho roll forming machine roll forming roll forming mill SAS duplicator Softball Trading Pins